Corrosion and chemical resistant coating
High electric strength
Low dielectric constant
Low temperature conformal deposition
Suitable for smaller production and laboratory use
Chamber size 25L and upwards
Series 300 equipped with a plasma source and more gas lines
Maximum coating thickness 50µm
Deposition rate 3µm per hour
Pinhole free film after 0.2µm
Room temperature deposition
Fully automatic or manual control of temperature, vacuum system and gas flows
Full system visualisation display, including system status and error messages
Including automatic leak check cycle
Parylene is pin-hole free coating which is applied under vacuum, through condensation from the vapour phase and appears on the substrate as a transparent film.
For this purpose, special vacuum equipment is required. This comprises of three consecutive, aligned chambers with varying temperature and pressure conditions, which are evacuated by a rotary vane pump through a cryo trap.
If you would like to receive further information on the Series 200 / 300 Parylene Coater product, please call us on 0845 340 2626. Alternatively, please email us and a member of our friendly team will be in contact shortly.